We are searching data for your request:
Upon completion, a link will appear to access the found materials.
Tip # 1: clean tile joints with washing up liquid
If your tile joints are dirty and all blackened, you can recover them by using everyday products that you necessarily have in your kitchen; namely: from dishwashing liquid, and the flagship product of ecological and economical cleaning, White vinegar !
To clean tile joints with this method, it's simple:
- Fill a bowl with water, then add white vinegar and a few drops of your usual dish soap. Mix gently.
- Dip a toothbrush in the liquid, then with a little elbow grease, rub the joints of your tiles.
- Rinse off with lukewarm water: miracle, the seals are totally clogged!
For a more than perfect result, you can, still using your toothbrush, make a final pass on your tile joints with hydrogen peroxide.
Tip # 2: remove stains from tile joints with clay stone
For clean tile joints dirty and dull, the clay stone is also a major household ally. And just like white vinegar, it is all that is ecological and economical! Here's how to use it to remove stains and grime from your tile joints, and even your home floor:
- Wet the sponge with cold water, soak it with clay stone and lightly foam the product.
- Clean your joints by rubbing with the sponge.
- Rinse with clear water; no need to rinse with plenty of water, the clay stone is an effective household cleaner, but not at all aggressive!
To note : in a kitchen, the clay stone can also be used to clean the sink, the ceramic hobs, the oven, the worktop ... Indeed, it is a multi-surface cleaner that has no equal to effortlessly degrease.
Tip 3: shine floors and joints with baking soda
When the tiles in your house look gray and the joints have become all dirty, there is one last miracle product to help you recover them: baking soda. If you use grandmother's tricks on a daily basis, you are sure to have a jar stored in a cupboard at home! For clean tile joints with baking soda, here is the method to follow:
- In a spray bottle, mix 4 tablespoons of baking soda with 10 centiliters of white vinegar. The mixture will start to foam like a mini-volcano: don't worry, this chemical reaction is completely normal.
- Spray the baking soda-white vinegar mixture on the dirty tile joints, then leave the product on for 24 hours until it can act.
- Rub your joints with a toothbrush or sponge, rinse with water, and admire the result!
Good to know : to prevent tiling joints exposed enough (in your kitchen or your bathroom for example) from getting dirty too quickly, you can cover them with a varnish for tiling joints which will protect them from stains and humidity .